AdguardTeam

AdguardTeam/dnsproxy

Simple DNS proxy with DoH, DoT, DoQ and DNSCrypt support

3.4kstars 346forks 35contributors Go

README.md

# DNS Proxy

[![Go Reference](https://pkg.go.dev/badge/github.com/AdguardTeam/dnsproxy.svg)](https://pkg.go.dev/github.com/AdguardTeam/dnsproxy)
[![Go Report Card](https://goreportcard.com/badge/github.com/AdguardTeam/dnsproxy)](https://goreportcard.com/report/AdguardTeam/dnsproxy)

A simple DNS proxy server that supports all existing DNS protocols including
`DNS-over-TLS`, `DNS-over-HTTPS`, `DNSCrypt`, and `DNS-over-QUIC`. Moreover,
it can work as a `DNS-over-HTTPS`, `DNS-over-TLS` or `DNS-over-QUIC` server.

- [How to install](#how-to-install)
- [How to build](#how-to-build)
- [Usage](#usage)
- [Examples](#examples)
    - [Simple options](#simple-options)
    - [Encrypted upstreams](#encrypted-upstreams)
    - [Encrypted DNS server](#encrypted-dns-server)
    - [Additional features](#additional-features)
    - [DNS64 server](#dns64-server)
    - [Fastest addr + cache-min-ttl](#fastest-addr--cache-min-ttl)
    - [Specifying upstreams for domains](#specifying-upstreams-for-domains)
    - [Specifying private rDNS upstreams](#specifying-private-rdns-upstreams)
    - [EDNS Client Subnet](#edns-client-subnet)
    - [Bogus NXDomain](#bogus-nxdomain)
    - [Basic Auth for DoH](#basic-auth-for-doh)

## How to install

There are several options how to install `dnsproxy`.

1. Grab the binary for your device/OS from the [Releases][releases] page.
2. Use the [official Docker image][docker].
3. Build it yourself (see the instruction below).

[releases]: https://github.com/AdguardTeam/dnsproxy/releases
[docker]: https://hub.docker.com/r/adguard/dnsproxy

## How to build

You will need Go 1.26 or later.

```shell
make build
```

## Usage

```none
Usage of ./dnsproxy:
  --bogus-nxdomain=subnet
        Transform the responses containing at least a single IP that matches specified addresses and CIDRs into NXDOMAIN.  Can be specified multiple times.
  --bootstrap/-b
        Bootstrap DNS for DoH and DoT, can be specified multiple times (default: use system-provided).
  --cache
        If specified, DNS cache is enabled.
  --cache-max-ttl=uint32
        Maximum TTL value for DNS entries, in seconds.
  --cache-min-ttl=uint32
        Minimum TTL value for DNS entries, in seconds. Capped at 3600. Artificially extending TTLs should only be done with careful consideration.
  --cache-optimistic
        If specified, optimistic DNS cache is enabled.
  --cache-size=int
        Cache size (in bytes). Default: 64k.
  --config-path=path
        YAML configuration file. Minimal working configuration in config.dist.yaml. Options passed through command line will override the ones from this file.
  --dnssec
        Defines whether the proxy should set the DO bits in the upstream requests.  Default: true.
  --doh-insecure-enabled
        If specified, the DoH server will skip TLS certificate verification.
  --doh-routes
        Routes for DNS-over-HTTPS.  If not specified, the default routes are registered:
        - "GET /", deprecated and will soon be removed,
        - "POST /", deprecated and will soon be removed.
        - "GET /dns-query",
        - "POST /dns-query".
  --dns64
        If specified, dnsproxy will act as a DNS64 server.
  --dns64-prefix=subnet
        Prefix used to handle DNS64. If not specified, dnsproxy uses the 'Well-Known Prefix' 64:ff9b::.  Can be specified multiple times.
  --dnscrypt-config=path/-g path
        Path to a file with DNSCrypt configuration. You can generate one using https://github.com/AdguardTeam/dnscrypt.
  --dnscrypt-port=port/-y port
        Listening ports for DNSCrypt.
  --edns
        Use EDNS Client Subnet extension.
  --edns-addr=address
        Send EDNS Client Address.
  --fallback/-f
        Fallback resolvers to use when regular ones are unavailable, can be specified multiple times. You can also specify path to a file with the list of servers.
  --help/-h
        Print this help message and quit.
  --hosts-file-enabled
        Use hosts files for resolving. Default: true.
  --hosts-files=path
        List of paths to the hosts files, can be specified multiple times.
  --http3
        Enable HTTP/3 support.
  --https-port=port/-s port
        Listening ports for DNS-over-HTTPS.
  --https-server-name=name
        Set the Server header for the responses from the HTTPS server.
  --https-userinfo=name
        If set, all DoH queries are required to have this basic authentication information.
  --insecure
        Disable secure TLS certificate validation.
  --ipv6-disabled
        If specified, all AAAA requests will be replied with NoError RCode and empty answer.
  --listen=address/-l address
        Listening addresses.
  --max-go-routines=uint
        Set the maximum number of go routines. A zero value will not not set a maximum.
  --optimistic-answer-ttl
        Default TTL value for expired DNS entries in optimistic cache.  Default: 30s
  --optimistic-max-age
        Period of time after which entries are removed from optimistic cache in human-readable form. Default: 12h.
  --output=path/-o path
        Path to the log file.
  --pending-requests-enabled
        If specified, the server will track duplicate queries and only send the first of them to the upstream server, propagating its result to others. Disabling it introduces a vulnerability to cache poisoning attacks.
  --port=port/-p port
        Listening ports. Zero value disables TCP and UDP listeners.
  --pprof
        If present, exposes pprof information on localhost:6060.
  --private-rdns-upstream
        Private DNS upstreams to use for reverse DNS lookups of private addresses, can be specified multiple times.
  --private-subnets=subnet
        Private subnets to use for reverse DNS lookups of private addresses.
  --quic-port=port/-q port
        Listening ports for DNS-over-QUIC.
  --ratelimit=int/-r int
        Ratelimit (requests per second).
  --ratelimit-subnet-len-ipv4=int
        Ratelimit subnet length for IPv4.
  --ratelimit-subnet-len-ipv6=int
        Ratelimit subnet length for IPv6.
  --refuse-any
        If specified, refuses ANY requests.
  --timeout=duration
        Timeout for outbound DNS queries to remote upstream servers in a human-readable form
  --tls-crt=path/-c path
        Path to a file with the certificate chain.
  --tls-key=path/-k path
        Path to a file with the private key.
  --tls-max-version=version
        Maximum TLS version, for example 1.3.
  --tls-min-version=version
        Minimum TLS version, for example 1.0.
  --tls-port=port/-t port
        Listening ports for DNS-over-TLS.
  --udp-buf-size=int
        Set the size of the UDP buffer in bytes. A value <= 0 will use the system default.
  --upstream/-u
        An upstream to be used (can be specified multiple times). You can also specify path to a file with the list of servers.
  --upstream-mode=mode
        Defines the upstreams logic mode, possible values: load_balance, parallel, fastest_addr (default: load_balance).
  --use-private-rdns
        If specified, use private upstreams for reverse DNS lookups of private addresses.
  --verbose/-v
        Verbose output.
  --version
        Prints the program version.
```

## Examples

### Simple options

Runs a DNS proxy on `0.0.0.0:53` with a single upstream - Google DNS.

```shell
./dnsproxy -u 8.8.8.8:53
```

The same proxy with verbose logging enabled writing it to the file `log.txt`.

```shell
./dnsproxy -u 8.8.8.8:53 -v -o log.txt
```

Runs a DNS proxy on `127.0.0.1:5353` with multiple upstreams.

```shell
./dnsproxy -l 127.0.0.1 -p 5353 -u 8.8.8.8:53 -u 1.1.1.1:53
```

Listen on multiple interfaces and ports:

```shell
./dnsproxy -l 127.0.0.1 -l 192.168.1.10 -p 5353 -p 5354 -u 1.1.1.1
```

The plain DNS upstream server may be specified in several ways:

- With a plain IP address:

```shell
  ./dnsproxy -l 127.0.0.1 -u 8.8.8.8:53
  ```

- With a hostname or plain IP address and the `udp://` scheme:

```shell
  ./dnsproxy -l 127.0.0.1 -u udp://dns.google -u udp://1.1.1.1
  ```

- With a hostname or plain IP address and the `tcp://` scheme to force using TCP:

```shell
  ./dnsproxy -l 127.0.0.1 -u tcp://dns.google -u tcp://1.1.1.1
  ```

### Encrypted upstreams

DNS-over-TLS upstream:

```shell
./dnsproxy -u tls://dns.adguard.com
```

DNS-over-HTTPS upstream with specified bootstrap DNS:

```shell
./dnsproxy -u https://dns.adguard.com/dns-query -b 1.1.1.1:53
```

DNS-over-QUIC upstream:

```shell
./dnsproxy -u quic://dns.adguard.com
```

DNS-over-HTTPS upstream with enabled HTTP/3 support (chooses it if it's faster):

```shell
./dnsproxy -u https://dns.google/dns-query --http3
```

DNS-over-HTTPS upstream with forced HTTP/3 (no fallback to other protocol):

```shell
./dnsproxy -u h3://dns.google/dns-query
```

DNSCrypt upstream ([DNS Stamp](https://dnscrypt.info/stamps) of AdGuard DNS):

```shell
./dnsproxy -u sdns://AQMAAAAAAAAAETk0LjE0MC4xNC4xNDo1NDQzINErR_JS3PLCu_iZEIbq95zkSV2LFsigxDIuUso_OQhzIjIuZG5zY3J5cHQuZGVmYXVsdC5uczEuYWRndWFyZC5jb20
```

DNS-over-HTTPS upstream ([DNS Stamp](https://dnscrypt.info/stamps) of Cloudflare DNS):

```shell
./dnsproxy -u sdns://AgcAAAAAAAAABzEuMC4wLjGgENk8mGSlIfMGXMOlIlCcKvq7AVgcrZxtjon911-ep0cg63Ul-I8NlFj4GplQGb_TTLiczclX57DvMV8Q-JdjgRgSZG5zLmNsb3VkZmxhcmUuY29tCi9kbnMtcXVlcnk
```

DNS-over-TLS upstream with two fallback servers (to be used when the main upstream is not available):

```shell
./dnsproxy -u tls://dns.adguard.com -f 8.8.8.8:53 -f 1.1.1.1:53
```

### Encrypted DNS server

Runs a DNS-over-TLS proxy on `127.0.0.1:853`.

```shell
./dnsproxy -l 127.0.0.1 --tls-port=853 --tls-crt=example.crt --tls-key=example.key -u 8.8.8.8:53 -p 0
```

Runs a DNS-over-HTTPS proxy on `127.0.0.1:443`.

```shell
./dnsproxy -l 127.0.0.1 --https-port=443 --tls-crt=example.crt --tls-key=example.key -u 8.8.8.8:53 -p 0
```

Runs a DNS-over-HTTPS proxy on `127.0.0.1:443` with HTTP/3 support.

```shell
./dnsproxy -l 127.0.0.1 --https-port=443 --http3 --tls-crt=example.crt --tls-key=example.key -u 8.8.8.8:53 -p 0
```

Runs a DNS-over-QUIC proxy on `127.0.0.1:853`.

```shell
./dnsproxy -l 127.0.0.1 --quic-port=853 --tls-crt=example.crt --tls-key=example.key -u 8.8.8.8:53 -p 0
```

Runs a DNSCrypt proxy on `127.0.0.1:443`.

```shell
./dnsproxy -l 127.0.0.1 --dnscrypt-config=./dnscrypt-config.yaml --dnscrypt-port=443 --upstream=8.8.8.8:53 -p 0
```

> [!TIP]
> In order to run a DNSCrypt proxy, you need to obtain DNSCrypt configuration first. You can use [dnscrypt][dnscrypt] command-line tool to do that with a command like this `./dnscrypt generate --provider-name=2.dnscrypt-cert.example.org --out=dnscrypt-config.yaml`.

[dnscrypt]: https://github.com/AdguardTeam/dnscrypt

### Additional features

Runs a DNS proxy on `0.0.0.0:53` with rate limit set to `10 rps`, enabled DNS cache, and that refuses type=ANY requests.

```shell
./dnsproxy -u 8.8.8.8:53 -r 10 --cache --refuse-any
```

Runs a DNS proxy on 127.0.0.1:5353 with multiple upstreams and enable parallel queries to all configured upstream servers.

```shell
./dnsproxy -l 127.0.0.1 -p 5353 -u 8.8.8.8:53 -u 1.1.1.1:53 -u tls://dns.adguard.com --upstream-mode parallel
```

Loads upstreams list from a file.

```shell
./dnsproxy -l 127.0.0.1 -p 5353 -u ./upstreams.txt
```

### DNS64 server

`dnsproxy` is capable of working as a DNS64 server.

> [!NOTE] What is DNS64/NAT64
> This is a mechanism of providing IPv6 access to IPv4. Using a NAT64 gateway with IPv4-IPv6 translation capability lets IPv6-only clients connect to IPv4-only services via synthetic IPv6 addresses starting with a prefix that routes them to the NAT64 gateway. DNS64 is a DNS service that returns AAAA records with these synthetic IPv6 addresses for IPv4-only destinations (with A but not AAAA records in the DNS). This lets IPv6-only clients use NAT64 gateways without any other configuration.
> See also [RFC 6147](https://datatracker.ietf.org/doc/html/rfc6147).

Enables DNS64 with the default [Well-Known Prefix][wkp]:

```shell
./dnsproxy -l 127.0.0.1 -p 5353 -u 8.8.8.8 --use-private-rdns --private-rdns-upstream=127.0.0.1 --dns64
```

You can also specify any number of custom DNS64 prefixes:

```shell
./dnsproxy -l 127.0.0.1 -p 5353 -u 8.8.8.8 --use-private-rdns --private-rdns-upstream=127.0.0.1 --dns64 --dns64-prefix=64:ffff:: --dns64-prefix=32:ffff::
```

Note that only the first specified prefix will be used for synthesis.

PTR queries for addresses within the specified ranges or the [Well-Known one][wkp] could only be answered with locally appropriate data, so dnsproxy will route those to the local upstream servers.  Those should be specified and enabled if DNS64 is enabled.

[wkp]: https://datatracker.ietf.org/doc/html/rfc6052#section-2.1

### Fastest addr + cache-min-ttl

This option would be useful to the users with problematic network connection. In this mode, `dnsproxy` would detect the fastest IP address among all that were returned, and it will return only it.

Additionally, for those with problematic network connection, it makes sense to override `cache-min-ttl`.  In this case, `dnsproxy` will make sure that DNS responses are cached for at least the specified amount of time.

It makes sense to run it with multiple upstream servers only.

Run a DNS proxy with two upstreams, min-TTL set to 10 minutes, fastest address detection is enabled:

```shell
./dnsproxy -u 8.8.8.8 -u 1.1.1.1 --cache --cache-min-ttl=600 --upstream-mode=fastest_addr
```

who run `dnsproxy` with multiple upstreams

### Specifying upstreams for domains

You can specify upstreams that will be used for a specific domain(s). We use the dnsmasq-like syntax, decorating domains with brackets (see `--server` [description][server-description]).

**Syntax:** `[/[domain1][/../domainN]/]upstreamString`

Where `upstreamString` is one or many upstreams separated by space (e.g. `1.1.1.1` or `1.1.1.1 2.2.2.2`).

If one or more domains are specified, that upstream (`upstreamString`) is used only for those domains. Usually, it is used for private nameservers. For instance, if you have a nameserver on your network which deals with `xxx.internal.local` at `192.168.0.1` then you can specify `[/internal.local/]192.168.0.1`, and dnsproxy will send all queries to that nameserver. Everything else will be sent to the default upstreams (which are mandatory!).

1. An empty domain specification, `//` has the special meaning of "unqualified names only", which will be used to resolve names with a single label in them, or with exactly two labels in case of `DS` requests.
1. More specific domains take precedence over less specific domains, so: `--upstream=[/host.com/]1.2.3.4 --upstream=[/www.host.com/]2.3.4.5` will send queries for `*.host.com` to `1.2.3.4`, except `*.www.host.com`, which will go to `2.3.4.5`.
1. The special server address `#` means, "use the common servers", so: `--upstream=[/host.com/]1.2.3.4 --upstream=[/www.host.com/]#` will send queries for `*.host.com` to `1.2.3.4`, except `*.www.host.com` which will be forwarded as usual.
1. The wildcard `*` has special meaning of "any sub-domain", so: `--upstream=[/*.host.com/]1.2.3.4` will send queries for `*.host.com` to `1.2.3.4`, but `host.com` will be forwarded to default upstreams.

Sends requests for `*.local` domains to `192.168.0.1:53`. Other requests are sent to `8.8.8.8:53`:

```shell
./dnsproxy \
    -u "8.8.8.8:53" \
    -u "[/local/]192.168.0.1:53" \
    ;
```

Sends requests for `*.host.com` to `1.1.1.1:53` except for `*.maps.host.com` which are sent to `8.8.8.8:53` (along with other requests):

```shell
./dnsproxy \
    -u "8.8.8.8:53" \
    -u "[/host.com/]1.1.1.1:53" \
    -u "[/maps.host.com/]#" \
    ;
```

Sends requests for `*.host.com` to `1.1.1.1:53` except for `host.com` which is sent to `9.9.9.10:53`, and all other requests are sent to `8.8.8.8:53`:

```shell
./dnsproxy \
    -u "8.8.8.8:53" \
    -u "[/host.com/]9.9.9.10:53" \
    -u "[/*.host.com/]1.1.1.1:53" \
    ;
```

Sends requests for `com` (and its subdomains) to `1.2.3.4:53`, requests for other top-level domains to `1.1.1.1:53`, and all other requests to `8.8.8.8:53`:

```shell
./dnsproxy \
    -u "8.8.8.8:53" \
    -u "[//]1.1.1.1:53" \
    -u "[/com/]1.2.3.4:53" \
    ;
```

### Specifying private rDNS upstreams

You can specify upstreams that will be used for reverse DNS requests of type PTR for private addresses. Same applies to the authority requests of types SOA and NS. The set of private addresses is defined by the `--private-rdns-upstream`, and the set from [RFC 6303][rfc6303] is used by default.

The additional requirement to the domains specified for upstreams is to be `in-addr.arpa`, `ip6.arpa`, or its subdomain.  Addresses encoded in the domains should also be private.

Sends queries for `*.168.192.in-addr.arpa` to `192.168.1.2`, if requested by client from `192.168.0.0/16` subnet.  Other queries answered with `NXDOMAIN`:

```shell
./dnsproxy \
    -l "0.0.0.0" \
    -u "8.8.8.8" \
    --use-private-rdns \
    --private-subnets="192.168.0.0/16" \
    --private-rdns-upstream="192.168.1.2" \
    ;
```

Sends queries for `*.in-addr.arpa` to `192.168.1.2`, `*.ip6.arpa` to `fe80::1`, if requested by client within the default [RFC 6303][rfc6303] subnet set.  Other queries answered with `NXDOMAIN`:

```shell
./dnsproxy\
    -l "0.0.0.0"\
    -u 8.8.8.8\
    --use-private-rdns\
    --private-rdns-upstream="192.168.1.2"\
    --private-rdns-upstream="[/ip6.arpa/]fe80::1"
```

[rfc6303]: https://datatracker.ietf.org/doc/html/rfc6303
[server-description]: http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html

### EDNS Client Subnet

To enable support for EDNS Client Subnet extension you should run dnsproxy with `--edns` flag:

```shell
./dnsproxy -u 8.8.8.8:53 --edns
```

Now if you connect to the proxy from the Internet - it will pass through your original IP address's prefix to the upstream server.  This way the upstream server may respond with IP addresses of the servers that are located near you to minimize latency.

If you want to use EDNS CS feature when you're connecting to the proxy from a local network, you need to set `--edns-addr=PUBLIC_IP` argument:

```shell
./dnsproxy -u 8.8.8.8:53 --edns --edns-addr=72.72.72.72
```

Now even if your IP address is 192.168.0.1 and it's not a public IP, the proxy will pass through 72.72.72.72 to the upstream server.

### Bogus NXDomain

This option is similar to dnsmasq `bogus-nxdomain`.  `dnsproxy` will transform
responses that contain at least a single IP address which is also specified by
the option into `NXDOMAIN`. Can be specified multiple times.

In the example below, we use AdGuard DNS server that returns `0.0.0.0` for
blocked domains, and transform them to `NXDOMAIN`.

```shell
./dnsproxy -u 94.140.14.14:53 --bogus-nxdomain=0.0.0.0
```

CIDR ranges are supported as well.  The following will respond with `NXDOMAIN`
instead of responses containing any IP from `192.168.0.0`-`192.168.255.255`:

```shell
./dnsproxy -u 192.168.0.15:53 --bogus-nxdomain=192.168.0.0/16
```

### Basic Auth for DoH

By setting the `--https-userinfo` option you can use `dnsproxy` as a DoH proxy
with basic authentication requirements.

For example:

```shell
./dnsproxy \
    --https-port='443' \
    --https-userinfo='user:p4ssw0rd' \
    --tls-crt='…/my.crt' \
    --tls-key='…/my.key' \
    -u '94.140.14.14:53' \
    ;
```

This configuration will only allow DoH queries that contain an `Authorization` header containing the BasicAuth credentials for user `user` with password `p4ssw0rd`.

Add `-p 0` if you also want to disable plain-DNS handling and make `dnsproxy` only serve DoH with Basic Auth checking.

Repository info

Default branch: master
Latest version: v0.86.0
Created: 19/12/2018
Last activity: 29/10/2026
License: Apache-2.0
Open issues: 187
Watchers: 62

Topics

dns dns-over-https dns-over-quic dns-over-tls dnscrypt golang open-source proxy

Contributors

ameshkov

306 contributions

aadmitrevskiy

165 contributions

EugeneOne1

144 contributions

szolin

90 contributions

ainar-g

57 contributions